GERMANY
Mounting the COMPIT/E and COMPIT/E+ on and removing them from the bicycle’s handlebar
30
If the screws cannot be tightened evenly when mounting the COMPIT/E on the bicycle,
the COMPIT/E may come loose from the bicycle and cause injury.
➤When mounting the COMPIT/E, tighten the screws evenly, alternating
between them.
CAUTION
!
!
➤ Mount the COMPIT/E on the handlebar with a torque wrench. To do so, tighten the screws (9)
evenly (alternating between them) using the torque (1 Nm) indicated on the clamping arms.
To Next Page
Loading...
