38
GERMANY
Charging the Smartphone via the +COM/UNIT
Charging the smartphone with a cable
If you have a smartphone without a Qi charging function, you can charge it with an optional USB cable while
you’re on the move using the +COM/UNIT. Proceed as follows in this regard:
➤ Ensure that the +COM/UNIT is sufficiently charged (min. 50 %).
➤ Connect the optional USB cable (2) to the output socket of the +COM/UNIT (2).
➤ Now connect it to your smartphone (1).
➤ Proceed as described in the section entitled Charging your smartphone without a cable to charge your
smartphone. Please refer to page 36 regarding this matter.
Proceed as follows once your smartphone is charged:
➤ Remove the USB cable from your smartphone and from the +COM/UNIT.
➤ Remove your smartphone from the +COM/UNIT by turning it (approx. 45°) above the Qi docking station.
➤ Press the safety lever and remove the +COM/UNIT from the COMPIT/E or COMPIT/E+ in the
same way as the smartphone.
➤ Recharge the +COM/UNIT if necessary. Please refer to page 42 regarding this matter.
To Next Page
Loading...
