GERMANY
Mounting the COMPIT on the Handlebars of the Bicycle and Removing it
28
A non-uniform tightening of the screws when mounting the COMPIT on
the bicycle can result in the COMPIT becoming detached from the
bicycle and causing injuries.
➤When mounting the COMPIT, tighten the screws alternately and uniformly.
CAUTION
!
!
➤ Use a torque spanner to mount the COMPIT on the handlebars of the bicycle. To do so, tighten the
screws (7) applying the torque that is stated on the clamping arms (2 Nm) alternately and uniformly.
To Next Page
Loading...
