Sky Sky+HD - Switching on Dolby Digital Audio; Adjusting Sound Synchronisation

77
Switching on Dolby
®
Digital audio
With the digital audio outputs you can connect your Sky±HD box to a compatible
home cinema system and listen to programmes broadcast in Dolby
®
Digital audio.
For this you need an optical or coaxial cable (not supplied) and you need to change
the default settings on your Sky±HD box:
1 Press services, scroll right to Settings and press select.
2 Highlight Digital Audio Output and use left/right to choose Dolby D.
3 Press green (Save Settings) when you’re done.
Some older amplifiers may not support Dolby
®
Digital audio.
Adjusting sound synchronisation
If you’ve connected your Sky±HD box to a home cinema system using one of the
digital audio outputs, you may find the audio and video are out of sync. If this
happens, you can easily change the sound settings to correct the sound.
You can change the settings as follows:
1 Press services, scroll right to Settings and press select.
2 Highlight Digital Audio Output Delay and press select.
3 In the Digital Audio Output Delay banner, use the left/right arrow to choose
the setting you want. In this preview mode, you can hear the results as you
adjust the level.
4 Press select then press green to save the setting.
To change the delay setting without a preview, highlight Digital Audio Output Delay
and use the left/right arrow to choose the right setting. Press green (Save Settings)
when you’re done.
YOUR SKY±HD BOX