97
SPECIFICATIONS
Specifications continued
Hereby, Thomson declares that this set top box is in compliance with the essential
requirements and other relevant provisions of the following Directives: 2006/95/EC
(LVD Directive); 2004/108/EC (EMC Directive); 1999/5/EC (R&TTE Directive).
If you connect earthed equipment to the RS-232 port, you must use an
approved screened cable.
The model number, serial number and electrical rating of this set top box
are on a label on its base and rear.
Thomson, 566 Chiswick High Road, London W4 5AN United Kingdom
Thomson Mk1 and Mk2 Specifications
Operating voltage: 230V AC; 50Hz
Power consumption: 45W (max.) / LNB switching +13/+18VDC 275mA MAX/22kHz
Weight: 5kg (packed)
Dimensions: 399mm x 295mm x 81mm (inc. rubber feet and connectors)
UHF modulator: CCIR PAL System I; Ch. 21 to 69 (factory setting is 68)
Operating temp. range: +5°C to +45°C
Storage temp. range: -20°C to +60°C
Hard disk capacity: 300GB (160GB personal storage space)
Connectors
MAINS INPUT: IEC 60320 2-pin
DISH INPUT 1: female F-type 75Ω (950-2150 MHz)
DISH INPUT 2: female F-type 75Ω (950-2150 MHz)
TELEPHONE LINE: RJ11, V90
RS-232: DB-9 female, data communications equipment
(DCE) / EIA/TIA-232-E ITU-T V.28 115.2 kbit/s (max.)
AERIAL IN: IEC 60169-2 female
RF OUT-1: IEC 60169-2 male
RF OUT-2: IEC 60169-2 male
DIGITAL AUDIO OUT: OPTICAL and COAXIAL digital audio sockets for 5.1 surround sound
AUDIO OUT (L and R): Phono sockets (RCA)
USB 2.0 : (for future connectivity) front and rear connectors
VCR/DVD SCART: SCART (composite video in/out; RGB in/out)
TV SCART: SCART (composite video out; RGB out)
: 1.1 type A
ETHERNET: (for future connectivity) RJ45, IEEE802.3 10-BASE-T and 100BASE-TX
S-VIDEO OUT: 4-way mini-DIN
SATA: External HDD interface, 1.0a
HD ANALOGUE COMPONENTS: Y, Pr, Pb (selected models only)
To Next Page
Loading...
