115 Skydio X10D INTL - Operator Manual © 2024 Skydio, Inc. All rights reserved.
Flight
Step 2 - Configure your lighting settings
Improve visibility by enabling infrared or visible strobe lights. Select Lighting then toggle on RGB
(default navigation lights), Infrared, or Strobe lights. Infrared and Strobe lights cannot be on at
the same time.
Step 3 - Enable NightSense
By default, NightSense will automatically turn on when entering Low Light mode. Use the le
sidebar quick action to subsequently turn NightSense on or o. The visible or infrared lights from
the NightSense attachments will illuminate the area around the drone.
To Next Page
Loading...
