15 Skydio X10D INTL - Operator Manual © 2024 Skydio, Inc. All rights reserved.
Skydio X10D batteries are shipped in a state of hibernation and will not power on your drone out
of the box. Your batteries will automatically exit this state once they begin charging for the first
time.
Charging Skydio X10D Batteries
Step 1 - Remove battery from drone
Skydio X10D batteries are held in place using a magnetic connection.
1. Firmly grip the drone chassis with one hand
2. Grip the battery with your other hand, placing your palm over the power button and
wrapping your thumb under the battery
3. Using your fingers as leverage, press against the drone until the magnets disengage and
slide the battery away from the sensor package
The Skydio X10D Dual Charger sequentially charges two batteries. The Dual Charger will
prioritize fully charging the battery with the highest charge level. If both batteries are depleted, it
will prioritize the battery that is inserted first.
Using the Skydio X10D Dual Charger
Getting Started
To Next Page
Loading...
