74 Skydio X10D INTL - Operator Manual © 2024 Skydio, Inc. All rights reserved.
Camera Settings
When your drone captures a photo or video, it will save one image file with the color camera.
Two files will save if you have JPG and DNG enabled. If you would like Skydio X10D to also
capture an image file with the thermal camera, enable Thermal Capture within the Thermal
Settings.
Use Camera Mode on the right sidebar to switch between photo or video. Skydio X10D can
capture photos or videos but not both at the same time. Your color and thermal cameras will
always be in the same Camera Mode.
Access your photos and videos using the Media menu located in Global Settings.
Photo enabled Video enabled
Overview
NOTE: Photo and Video mode settings are independent of each other and
persist through mode changes, but not power cycles.
To Next Page
Loading...
