Skydio X10D - Updating Skydio X10 D System

28 Skydio X10D INTL - Operator Manual © 2024 Skydio, Inc. All rights reserved.
Updating the Skydio X10D System
Preflight
Step 1 - Access the files from Skydio Fleet Manager for Oine Drones
• .zip file which is the update for your X10D vehicle
• .tar file which is the update for your Skydio X10D Controller
Step 2 - Generate the .zip file and download the .tar file
Step 3 - Insert a memory drive into your computer
Step 4 - Copy the oine_ota folder and the .tar file into the root level of your memory drive
• So that they are not contained inside any other folders
• Safely eject the memory drive from your computer
Step 5 - Insert the memory drive into the rear USB-C port on the vehicle
Step 6 - Power on the vehicle
• The update will begin automatically
• The lights on your drone will begin to display the update status:
Update Status Light Feedback
Initializing Solid yellow
0-25% 1 arm flashing yellow light
25-50% 1 arm solid yellow / 1 arm flashing yellow
50-75% 2 arms solid yellow / 1 arm flashing yellow
75-100% 3 arms solid yellow / 1 arm flashing yellow
Complete 4 arms solid yellow light
Error Flashing red