29 Skydio X10D INTL - Operator Manual © 2024 Skydio, Inc. All rights reserved.
Preflight
Step 7 - Power on your controller
Step 8 - Select the Information menu
Step 9 - Select Controller Update
Step 10 - Insert the memory drive into the USB-C port on your controller
Step 11 - Select Update
• Navigate to the memory drive root folder
• Select the update .tar file
Step 12 - Select Done
• The update will begin automatically
• Allow up to five minutes for the update to complete
• During this process, your controller may restart multiple times
Step 13 - Verify that the version numbers matches the version numbers provided by Skydio
USB-C port
To Next Page
Loading...
