130 Skydio X10D INTL - Operator Manual © 2024 Skydio, Inc. All rights reserved.
Flight
Step 1 - Position Skydio X10D above a clear area so that you can move underneath it
Ensure the drone is facing away from you and extend your arm away from your body.
• The sensor package should face away from your body
• The back of the chassis and the battery are closest to you
Step 2 - Initiate landing
Skydio X10D will descend vertically with full obstacle avoidance until it is 10 (3 m) above the
ground.
Once your drone is below 10 (3 m), the lights on the drone turn yellow to indicate obstacle
avoidance is disabled for the remainder of the landing.
Landing Skydio X10D in your hand is a quick and convenient way to start or end your flight,
particularly if you are not in a clear, level area. For your safety, always use caution when hand
launching or landing.
Hand Landing
WARNING: Do not hand launch or hand land during windy days, when flying
at night, or extreme environmental conditions as serious injury and/or damage
may occur.
!
WARNING: Do not attempt to grab or catch Skydio X10D without initiating a
landing, the motors will continue to spin at full speed and may cause severe
injury. Do not attempt to hand land until the lights turn yellow. Attempting to
hand land while obstacle avoidance is active will cause it to attempt to avoid
your hand and may result in Skydio impacting yourself or another nearby object.
!
To Next Page
Loading...
