16 Skydio X10D INTL - Operator Manual © 2024 Skydio, Inc. All rights reserved.
Step 2 - Place batteries into the X10D Dual Charger
Ensure the battery and connection pins are free of debris and interference. Gently push down to
ensure the batteries are properly seated.
Step 3 - Insert the power supply
Two charging ports are located on the back of the Skydio X10D Dual Charger. You may use
either the 100 W USB-C power supply or the 230 W fast power supply.
Plug into a power source.
230 W fast power supply 100 W USB-C power supply
Getting Started
To Next Page
Loading...
