Skydio X10D - Page 38

33 Skydio X10D INTL - Operator Manual © 2024 Skydio, Inc. All rights reserved.
Preflight
Pre-warming Skydio X10D Batteries
If Skydio X10D detects that a battery is too cold to launch, the battery will automatically begin
self-warming. Launch will become unblocked when the battery is suciently warmed for the
given state of charge.
You also have the option to prewarm a battery before inserting into the drone:
Step 1 - Triple tap the battery button to begin the self-warming process
• The lights on the battery will turn orange during the self-warming process
• Triple tapping again will end the self-warming process
Step 2 - If the battery is cold enough it will begin self-warming
• When self-warming is complete, the lights on the battery will briefly turn blue and then
power o
Step 3 - Insert the battery into the drone and power on
• If the self-warming was still in progress prior to inserting, it will continue while the battery
is in the drone
• Launch will become unblocked when the battery is suciently warmed for the given state
of charge