21 22
CAUTION: The Skydio Enterprise Controller is not weatherproof. Do not operate in any precipitation, including rain, fog,
snow, or similar environments. The Skydio Enterprise Controller is also not resistant to small debris—do not rest the
controller in fine sand, dirt or on similar terrain where particles can get trapped in the fan.
9 Skydio X2 - User guide © 2021 Skydio, Inc. All rights reserved.
GETTING STARTED / CHARGING YOUR SYSTEM
Charging your system
Skydio X2
The best way to charge your Skydio X2 batteries is by using the Skydio X2 Dual Charger.
To charge your Skydio X2 batteries, follow the steps below.
WARNING: Never expose batteries to extreme hot or cold temperatures. Follow instructions and warnings for battery
storage and use in the X2 Batteries section of this manual.
How to charge via X2 Dual Charger
1. Slide your X2 batteries into the Skydio X2 Dual
Charger, ensuring that the connector between the
charger and each battery is fully seated.
NOTE: You can also choose to charge a single X2 battery using
the Skydio X2 Dual Charger.
2. Connect your Skydio X2 Dual Charger to the provided
100W power USB-C power adaptor.
3. Plug the power adaptor into a 100-240V power
source. The LEDs on the battery will begin to flash
when the unit
is charging.
NOTE: The Skydio X2 Dual Charger is capable of
simultaneously providing current to two batteries, but the
charging system will prioritize fully charging a single battery.
When charging has completed, the LEDs on the battery will
To Next Page
Loading...
