power off.
10 Skydio X2 - User guide © 2021 Skydio, Inc. All rights reserved.
GETTING STARTED / CHARGING
YOUR SYSTEM
Skydio X2
(cont.)
How to charge via Skydio
X2
1. Slide the X2 battery into the battery tray
towards the gimbal until it is magnetically
held in place.
2. Connect your Skydio X2 to the provided
USB charging cable and 100W adaptor. You
may also use the 65W adaptor that comes
included with the Skydio Enterprise
Controller.
3. Plug the power adaptor into a 100-240V
power source. Skydio X2 will power on and
the battery LEDs will begin to flash when
charging.
When charging has completed, the drone will
power off.
X2 Battery Charge Levels
When X2 is powered on or the battery is
charging, the LEDs on the battery will
indicate the current state of charge. When
X2 is powered off or the battery is detached,
you can view the battery’s state of charge by
tapping on the battery button to light up the
LEDs.
1 LED 2 LEDs 3 LEDs 4 LEDs
To Next Page
Loading...
