the provided USB-C to USB-C cable to Skydio X2 and the other end of the cable to the USB-C
charging port on the controller.
If pairing is
successful, you will see the following screen:
Once your devices are paired, you will be able to find your
drone by navigating to INFO > Paired Drone.
NOTE: The Skydio Enterprise Controller may only be paired to
one drone at a time. To pair a new X2, you will need to unpair
the first drone.
18 Skydio X2 - User guide © 2021 Skydio, Inc. All rights reserved.
PRE-FLIGHT OPERATIONS / CHECK SOFTWARE
VERSIONS
Check software versions
Before flying, ensure that your Skydio X2 and Skydio Enterprise Controller are up-to-date. You can
verify your software versions in the following locations:
To Next Page
Loading...
