and smudge-free before every flight.
6. Ensure motors on arms and gimbal move easily and
are free and clear of debris. If you find that there is
something restricting the arm motion, try rotating,
gently knocking, or blowing on it to clear any debris.
24 Skydio X2 - User guide © 2021 Skydio, Inc. All rights reserved.
PRE-FLIGHT OPERATIONS
Configure device settings
Ensure the critical settings for your Skydio X2 and controller are set up as desired before your flight.
Information about the various settings can be found in the next section, Device Settings on page 28.
To Next Page
Loading...
