Before each flight, perform a pre-
flight inspection to ensure your
Skydio X2 is safe and ready to fly.
DO NOT fly if there is any damage
noticed upon inspection.
4
2
1
3
5
6
6
1. Inspect drone body. Inspect your drone’s body to
ensure it is free of damage.
2. Inspect arms. Verify that Skydio X2’s arms are free of
damage and assembled properly. When assembled
and viewing the drone head-on, arms should be
parallel to the chassis
3. Inspect battery. Skydio X2 uses magnets to retain the
battery which may attract metallic debris that could
compromise the safe fitment of the battery. Prior to
installing any battery, visually inspect the bottom of
2
Skydio X2 and the battery, including connectors, to
ensure they are free of objects, debris, or damage.
Verify the battery is fully seated in the aircraft prior to
takeoff.
4. Inspect propellers. Ensure all propellers are firmly
attached and free of nicks, cracks, or other visible
damage. Never fly with damaged propellers.
5. Clean all cameras. Because Skydio X2 navigates
visually, it is essential to keep all of its cameras
clean. Use the included cleaning cloth (or any
clean
2
microfiber cloth) to ensure that all cameras are
dust
To Next Page
Loading...
Need help?
General
