SJRT Compact Series
Engine Powered December 2007 Page 19
TM
Section 2 - Familiarization Visual & Maintenance Inspection
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
contained in this operating manual and on the aerial platform.
• Hydraulic Pump
- Ensure there are no loose or missing
parts and there is no visible damage.
- Ensure all bolts are properly tightened.
- Ensure all fittings and hoses are properly
tightened and there is no evidence of
hydraulic leakage.
• Radiator
- Ensure radiator is secure.
- Ensure there are no loose or missing
parts and there is no visible damage.
- Check coolant level and add as
needed.
• Muffler and Exhaust
- Ensure muffler and exhaust system are
properly secured, with no evidence of
damage.
• Engine Pivot Tray
- Ensure there are no loose or missing
parts and no visible damage to the engine
pivot tray. Ensure that both tray-securing
bolts are in place.
• Engine Oil Level
- Maintaining the engine components
is essential to good performance and
service life of the aerial platform.
WARNING
Beware of hot engine components.
• Check oil level on dipstick
- Oil level should be in the “safe” zone. Add
oil as needed.
• Fuel Shut-off Valve
- Ensure there are no loose or missing
parts and there is no visible damage.
• Engine Air Filter
- Ensure there are no loose or missing
parts and there is no visible damage.
Emergency Main
Power Disconnect
Switch
Battery
Hydraulic Pump
Radiator
Muffler and Exhaust
Engine
Fuel Shut-off
Valve
Base Control
Console
Engine Air Filter
Tilt Sensor
FAMILIARIZATIONFAMILIARIZATION
To Next Page
Loading...
