Page 40 December 2007
SJRT Compact Series
Engine Powered
Component Identification Section 3 - Operation
3.5 Component Identification
The following descriptions are for identification,
explanation and locating purposes only.
3.5-1 Manual Storage Box
This weather-resistant box is mounted
on the platform railings. It contains
operating manual, ANSI manual
of responsibility and ANSI/CSA
certificate. The operating manual for
this make and model of aerial platform
must remain with the aerial platform
and should be stored in this box.
3.5-2 Maintenance Support
1
Figure 3-1. Maintenance Support
1. Maintenance Support - The maintenance support
is a safety mechanism designed to support the
scissor assembly. When properly positioned, it can
support the scissor assembly and empty platform.
The maintenance support must be used when
inspection and/or maintenance is to be performed
within the lifting mechanism. Refer to Section 3.13
for how to use the maintenance support.
WARNING
The maintenance support must be used
when inspection and/or maintenance or
repairs are to be performed within the
lifting mechanism. Failure to use this
safety mechanism could result in death
or serious injury.
WARNING
Do not reach through the scissor
assembly when the platform is raised
without the maintenance support properly
positioned. Failure to avoid this hazard
could result in death or serious injury.
To Next Page
Loading...
