Skyjack SJ 6826RT - Maintenance Schedule and Operator Checklist

SJRT Compact Series
Engine Powered December 2007 Page 67
TM
Section 4 Tables
General Maintenance
Before attempting any repair work, disconnect battery by turning emergency main power disconnect switch to
“ ” off position. Preventive maintenance is the easiest and least expensive type of maintenance.
Table 4.6 Maintenance and Inspection Schedule
Frequency
Daily
3 months or
150 hours
Yearly
Frequency
Daily
3 months or
150 hours
Yearly
Base
Labels A Base Weldment A
Electrical A Wheel/Tire Assembly A
Limit Switches A Steer Cylinder Assembly A
Hydraulic A Splitter Manifold A
Engine Compartment Tie Rod A
Emergency Main Power Disconnect Switch A Emergency Lowering Access Rod A
Base Control Switches A Ladder A
Tilt Sensor A Outriggers A
Battery A Function Tests
Hydraulic Pump A Test Emergency Main Power Disconnect Switch A
Radiator A Base Control Console
Muffler and Exhaust A Test Platform/Engine/Base Key Switch A
Engine Pivot Tray A Test Emergency Stop A
Engine Oil Level A Test Platform Raise/Lower Switch A
Fuel Shut-off Valve A Test Emergency Lowering A
Engine Air Filter A Test Free-wheeling A
Fuel Leaks A Platform Control Console
Hydraulic/Fuel Compartment Test Emergency Stop A
Hydraulic Tank A Test Enable Trigger Switch A
Hydraulic Oil A Test Platform Raising/Lowering A
Hydraulic Return Filter A Test Steering A
Fuel Tank A Test Driving A
Fuel Leaks A Test Speed Limit A
Main Manifold A Test Brakes A
Gear Type Flow Divider A Test Horn A
Platform Assembly A
60601AC-ANSI
Lanyard Attachment Anchors A
AC Outlet on Platform A
Manuals A
Platform Control Console A
Lifting Mechanism
Maintenance Support A
Scissor Assembly A
Scissor Bumpers A
Rollers A
Lift Cylinder(s) A
† - Refer to Sky
j
ack's website @ www.sky
j
ack.com for latest service bulletins porior to performin
g
quarterly or yearly inspection
* - Maintenance must be performed only by trained and competent personnel who are familiar with mechanical procedures.
B*†
Visual and Daily Maintenance Inspections
A - Perform Visual and Daily Maintenance Inspections & Functions Test. Refer to Section 2.3 and Section 2.4 of this manual.
B - Perform Scheduled Maintenance Inspection. Refer to Service & Maintenance manual.
B*†
B*†
WARNING
Use original or manufacturer-approved parts and components for aerial platform.