Do you have a question about the Skyjack SJ9664 RT and is the answer not in the manual?
Brand | Skyjack |
---|---|
Model | SJ9664 RT |
Category | Scissor Lifts |
Language | English |
Guidance on understanding the operation manual, safety labels, and warnings for MEWP use.
Identification and description of the main structural and functional components of the MEWP.
Details found on the MEWP's serial number nameplate, including model and specifications.
Defines operator and owner roles for MEWP maintenance, inspections, and repairs.
Guidelines for maintaining safe distances from electrical conductors to prevent electrocution.
Critical safety rules for operating the MEWP, including preventing falls, tip-overs, and entanglement.
Procedures for fall protection on the platform and conducting thorough worksite inspections.
Diagram and identification of the main parts and features of the MEWP.
Location of manual storage box and description of the main power disconnect switch.
Details and functions of the base and engine control consoles.
Explanation of controls and functions available on the platform control console.
Description of key features like travel positions, drive speed, tilt switch, and brake systems.
Information on general components like AC sockets, guardrails, and optional equipment.
Tasks an operator must perform before each shift, including inspections and function tests.
Detailed checklist for inspecting MEWP components like labels, electrical, hydraulic, and mechanical parts.
Step-by-step instructions for testing various MEWP functions and safety systems.
A comprehensive checklist for operators to document pre-operation inspections and tests.
Procedure for powering up and preparing the base and platform control consoles for operation.
Instructions for raising and lowering the platform using base and platform control consoles.
Guidance on operating MEWP drive and steering functions, including mode selection.
Procedures for extending platform sections and using the auto-level feature for stability.
Instructions for starting/stopping generator and safely shutting down the MEWP.
Using the SGLE function for lifting and engaging/disengaging the differential lock.
Procedure for lowering the platform using the emergency system if primary power fails.
Steps for safely moving the MEWP manually, including brake release and re-engagement.
Instructions for disconnecting and operating MEWP from ground using platform console.
Safe procedures for refueling MEWP with diesel, gasoline, or propane.
Guidelines for safely transporting MEWP, including hoisting and tie-down procedures.
Procedures for deploying and storing maintenance supports for safe MEWP servicing.
Steps for folding down and unfolding MEWP guardrail system for transport.
Procedure for safely maneuvering MEWP through doorways, including console management.
List of standard and optional equipment available for different MEWP models.
Information and template for recording annual MEWP inspections.
Technical data including dimensions, weight, height, and operating times for each model.
Information on EMC, hazardous locations, and operating temperature ranges.
Details on rated platform capacity, wind ratings, and side force limitations.
Data on MEWP weight distribution and pressure exerted on the floor surface.
Identification and description of labels on the MEWP's base control console.
Identification and description of labels on the MEWP's platform control console.
Labels on the left side of the MEWP, including logos, safety warnings, and model information.
Labels on the rear side of the MEWP, covering hazard ID, lift points, and tie-down points.
Labels on the right side of the MEWP, detailing wheel specs, tip-over hazards, and console location.
Labels on the front side of the MEWP, including logos, lift/tie-down points, and optional equipment notices.
Labels within the engine compartment, related to engine controls and safety warnings.
Safety and warning labels associated with the MEWP's outrigger system.
Labels indicating fall-protection anchorage points and associated fall hazard warnings.
Labels related to cold weather operation, including oil types and heater warnings.
Overview of Skyjack's control system and SMARTORQUE™ engine technology benefits.
Explanation of Skyjack's Axldrive™ system for enhanced traction and rough ground capability.
Information on Skyjack's accessory products to expand MEWP adaptability.