Page 40 December 2007
Rough Terrain Scissors
TM
Component Identification Operation - Section 3
3.5 Component Identification
The following descriptions are for identification,
explanation and locating purposes only.
3.5-1 Maintenance Support
1
Figure 3-1. Maintenance Support
1. Maintenance Support - The maintenance support
is a safety mechanism designed to support the
scissor assembly. When properly positioned it
can support the scissor assembly and empty
platform. The maintenance support must be
used when inspection and/or maintenance is to
be performed within the lifting mechanism. Refer
to Section 3.13 for how to use the maintenance
support.
WARNING
The maintenance support must be used
when inspection and/or maintenance or
repairs are to be performed within the
lifting mechanism. Failure to use this
safety mechanism could result in death
or serious injury.
WARNING
Do not reach through the scissor
assembly when the platform is raised
without the maintenance support properly
positioned. Failure to avoid this hazard
could result in death or serious injury.
3.5-2 Manual Storage Box
This weather-resistant box is mounted
on the platform railings. It contains the
operating manual and other important
documentation. The operating manual
for this make and model of MEWP must
be stored in this box.
To Next Page
Loading...
Need help?
General
