Need help?Do you have a question about the Skyjack SJ6826RT and is the answer not in the manual?
General| Drive Speed | 3.5 mph |
|---|---|
| Drive Speed (Stowed) | 3.5 mph |
| Fuel Type | Diesel |
| Power Source | Diesel |
| Platform Height | 26 ft |
| Machine Width | 68 in (1.73 m) |
| Machine Length | 122 in (3.10 m) |
| Overall Width | 68 in (1.73 m) |
| Overall Length | 122 in (3.10 m) |
| Turning Radius (Inside) | 60 in (1.52 m) |
| Working Height | 32 ft |
Details the maintenance and inspection schedule for the work platform.
Checklist for various inspection types, including PDI, frequent, and annual.
Inspection points for the base and engine components of the MEWP.
Procedures for inspecting the scissor assembly, sliders, rollers, and lift cylinders.
Inspection checklist for railings, gates, fall-protection anchorages, and control consoles.
Explains the numbering system for hydraulic hoses and fittings.
Provides torque specifications for various fasteners in US Imperial units.
Provides torque specifications for various fasteners in Metric units.
Lists key specifications and features of the SJ6826 RT and SJ6832 RT models.
Defines common electrical symbols used in schematics.
Defines common hydraulic symbols used in schematics.
Lists hydraulic components with part numbers and descriptions.
Lists electrical components with part numbers and descriptions.
Electrical panel diagram for ANSI/CSA, CE, and AS configurations.
Hydraulic schematic diagram for ANSI/CSA configurations.
Troubleshooting guide for electrical system issues.
Troubleshooting steps when all controls are inoperative.
Troubleshooting steps for engine not cranking from either control.
Troubleshooting guide for hydraulic system issues.
Troubleshooting steps when all hydraulic functions are inoperative.
General safety and workmanship guidelines for servicing equipment.
Procedures for winching, towing, and manually releasing the parking brake.
Resistance checks for the pickup sensor, ignition coil, and ignitor.
Details on auto-leveling outrigger settings and common error codes.
Key functions and operation of the EZcal calibration and diagnostic tool.
Procedure for calibrating and checking the load sensing system.
Quick reference chart for LED error codes on the GP102 module.
Instructions for replacing and adjusting the high-speed cutout limit switch.
To Next Page