145
SJ6826RT, SJ6832RT
213560ABA
3. Retest the deection, and continue to adjust as
needed until it falls within the range specied
above.
5.3-3 Kubota Dual Fuel (DF972 / WG752)
Engine Throttle Setting
Preparation
1. Look for a piece of reective tape on the fan belt
pulley. If the reective tape is missing, attach a
small piece.
2. When measuring the engine speed using a
digital tachometer, aim the tachometer at this
reective strip while the engine is running.
3. On the platform control box, set the low/
high throttle switch to low. Start the engine
and let it run until it reaches normal operating
temperature.
High Throttle Check and Setting
1. Push the solenoid plunger in, and hold it there.
Measure the rpm using a digital tachometer, as
described in Step 2.
To order go to Discount-Equipment.com