28
SJ6826RT, SJ6832RT
213560ABA
Section 1 – Scheduled Maintenance Platform inspections
1.8 Platform inspections
WARNING
Fall Hazard. Use the three points of contact
principle when you use the MEWP to enter or exit
the platform. If you do not obey, there is a risk of
death or serious injury.
1. Enter the platform and close the gate.
1
Railings and gate (B)
▪ Make sure there are no loose or missing parts,
and there is no visible damage.
▪ Make sure that the lock-pins and fasteners are
correctly locked.
▪ Make sure that the platform railings are in the
correct position and locked with lock-pins.
▪ Make sure that the gate is in good condition
and operates correctly.
▪ Refer to 57-2 Railing Maintenance and Repair
for the railing maintenance information.
2
Fall-protection anchorages (B)
▪ Make sure that the fall-protection anchorages
are correctly installed.
▪ Make sure there is no visible damage.
3
AC power socket (B)
▪ Make sure there is no visible damage.
4
Platform control console (B)
▪ Make sure the control console is locked with
lock-pins.
▪ Make sure the platform control cable is
correctly locked, and there is no visible
damage.
▪ Make sure all switches operate correctly.
5
Manual storage box (B)
▪ Make sure that the operation manual and
other important documents are in the manual
storage box.
▪ Make sure that the documents are in good
condition, and you can read them.
▪ Always put the manuals and other documents
back in the storage box after use.
6
Extension platform (B)
▪ Make sure that the extension deck is correctly
installed.
▪ Make sure there is no visible damage or
missing components.
▪ Make sure that the extension handles, push
bars, and extension lock bars are in good
working order and that it has no loose or
missing parts and there is no visible damage.
2. Use the MEWP ladder to exit the platform.
3
4
5
6
2
1
To order go to Discount-Equipment.com
To Next Page
Loading...
