EasyManua.ls Logo

Skyjack SJ6826RT - Engine Cranks but Does Not Start - Kubota Dual Fuel (Propane; Gas)

Skyjack SJ6826RT
177 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
90
SJ6826RT, SJ6832RT
213560ABA
Section 4 – Troubleshooting Information Electrical System
12. Loose or broken wire #32A from Engine Harness to
Glow Plug Timer GPT1.
Check continuity. Replace if defective.
13. Loose or broken wire #02 from Glow Plug Timer GPT1
to Engine Harness.
Check continuity. Replace if defective.
14. Defective Glow Plug Timer GPT1. Check timer. Replace if defective.
4.2-7 Engine Cranks but Does not Start – Kubota Dual Fuel (Propane/ Gas)
1. Loose or broken wire #37 from Engine Harness to
Ignition Control Module ICM1, Fuel Select switch S33,
and Ignition Coils IGC1, 2, and 3.
Check continuity. Replace if defective.
2. Defective Fuel Select switch S33.
Operate switch. Check continuity between wire #37 and
wire #11 on switch (Gas selected).
Check continuity between wire #37 and wire #50 on
switch (Propane selected).
Replace if defective.
3. Loose or broken wire #11 from Fuel Select switch S33
to Gas Valve Solenoid 2G-11 and/or Fuel Pump FP.
Check continuity. Replace if defective.
4. Loose or broken wire #00 from Gas Valve Solenoid
2G-11 and/or Fuel Pump FP to battery negative (-).
Check continuity. Replace if defective.
5. Defective Gas Valve solenoid 2G-11. Check coil. Replace if defective.
6. Defective Fuel Pump FP. Check pump. Replace if defective.
7. Loose or broken wire #50 from Fuel Select switch S33
to Propane Valve solenoids 2P-50-1 and/or -2.
Check continuity. Replace if defective.
8. Loose or broken wire #00 from Propane Valve
solenoids 2P-50-1 and/or -2 to battery negative (-).
Check continuity. Replace if defective.
9. Defective Propane Valve solenoids 2P-50-1 and/or -2 Check coils. Replace if defective.
10. Loose or broken wire #31 from Engine Harness to
Choke Relay 31CR.
Check continuity. Replace if defective.
11. Loose or broken wire #02 from Engine Harness to
Choke Relay 31CR.
Check continuity. Replace if defective.
12. Defective Choke Relay 31CR. Check Relay. Replace if defective.
13. Loose or broken wire #3A from Engine Harness to
Choke Relay 31CR.
Check continuity. Replace if defective.
To order go to Discount-Equipment.com

Table of Contents

Related product manuals