19
SJ6826RT, SJ6832RT
213560ABA
Base/Engine Section 1 – Scheduled Maintenance
1.6 Base/Engine
WARNING
Burn hazard. Do not touch hot engine components
without the correct PPE. Let the engine cool before
you do an inspection or servicing. If you do not
obey, there is a risk of death or serious injury.
1
Engine & Components (B, C)
▪ B - Frequent/periodic/pre-delivery Inspection
▪ Make sure there are no loose or missing parts.
▪ Make sure there is no visible damage.
▪ C - Annual Inspection
▪ Make sure to replace the engine oil and lter in
the recommended intervals.
2
Engine Intake Air Filter (B, C)
▪ B - Frequent/periodic/pre-delivery Inspection
▪ Make sure there are no loose or missing parts.
▪ Make sure there is no visible damage.
▪ Squeeze the lips of the vacuator valve to
remove the dirt and dust.
▪ C - Annual Inspection
▪ Do an inspection of the service indicator on
the air cleaner. Replace the lter element if
necessary.
3
Engine Oil (B)
▪ Use the dipstick to check the oil level.
▪ The oil level must be between the marks L
(low) and H (high). Add oil if it is necessary.
4
Radiator (B,C)
▪ B - Frequent/periodic/pre-delivery Inspection
▪ Make sure that the radiator is correctly
installed.
▪ Make sure there are no loose or missing parts
▪ Make sure there is no visible damage.
▪ C - Annual Inspection
▪ Do a check of the coolant level and condition.
Replace coolant if neccessary
5
Fuel Tank & Lines (B)
▪ Make sure that the fuel ller cap closes tightly.
▪ Make sure there is no visible damage to the
tank, gauge, hoses, or ttings.
▪ Make sure there is no indication of fuel
leakage from the tank, gauge, hoses, ttings,
pump, and lter.
6
Propane Tank & Lines (B)
▪ Make sure that the propane tank is correctly
installed to the mounting tray.
▪ Make sure there is no visible damage to the
propane tank, hoses and ttings.
▪ Make sure there is no indication of propane
leakage.
2
3 4
5
To order go to Discount-Equipment.com
To Next Page
Loading...
