Rough Terrain Scissors
December 2007 Page 59
Section 3 - Operation Moving the Aerial Platform Through a Doorway
25. Disconnect platform control console and return it
to the platform.
WARNING
Ensure that you maintain three points of
contact when using the ladder to mount/
dismount platform.
26. Return guardrails to upright position if folded. Refer
to Section 3.11 for guardrail folding procedure.
WARNING
Before operating this MEWP check the
guardrail system for loose or missing
locking pins. The guardrail system must
be upright and all pins must be locked in
place.
Death or serious injury could result if the
guardrail system is not upright or properly
locked.
27. Once platform control console is securely
reconnected and guardrails up, normal operation
may continue.