Skyjack SJ86T User Manual

SJ 86T
December 2007 Page 23
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
contained in this operating manual and on the MEWP.
FAMILIARIZATION
• Hydraulic Pumps
- Ensure there are no loose or missing
parts and there is no visible damage.
- Ensure all bolts are properly tightened.
- Ensure all ttings and hoses are properly
tightened and there is no evidence of
hydraulic leakage.
• Muffler and Exhaust
- Ensure mufer and exhaust system are
properly secured, with no evidence of
damage.
• Engine Pivot Tray
- Ensure there are no loose or missing
parts and no visible damage to the
engine pivot tray. Ensure engine pivot
tray is secure.
• Engine Oil Level
- Maintaining the engine components
is essential to good performance and
service life of the MEWP.
WARNING
Beware of hot engine components.
Check oil level on dipstick
- Oil level should be in the “safe” zone.
Add oil as needed. Refer to Table 4.2b for
recommended oil type.
• Engine Air Filter
- Ensure there are no loose or missing
parts and there is no visible damage.
• Fuel Leaks
- Ensure that there are no fuel leaks.
DANGER
Engine fuels are combustible. Inspect
the MEWP in an open, well-ventilated
area away from heaters, sparks and
ames. Always have an approved re
extinguisher within easy reach.
- Ensure fuel tank, hoses and ttings show
no visible damage and no evidence of
fuel leakage.
Main Power Disconnect Switch
Battery
Engine
Air Filter
MuferHydraulic
Pumps
Engine Compartment
Section 2 - Familiarization Visual & Maintenance Inspection

Skyjack SJ86T Specifications

General

Brand	Skyjack
Model	SJ86T
Category	Boom Lifts
Language	English