To Next PageTo Next Page
Need help?Do you have a question about the Skyrc T6200 and is the answer not in the manual?
General| Brand | Skyrc |
|---|---|
| Model | T6200 |
| Category | Battery Charger |
| Language | English |
Features a 3.2" touch-sensitive color LCD screen for intuitive operation and user input.
AUTO function sets feeding current, prevents overcharging, and provides safety through two-way linkage.
Allows users to check charging capacity, cell voltage, time, and temperatures in real-time.
Employs an individual-cell-voltage balancer, eliminating the need for an external one.
Monitors and balances each cell during discharge, automatically stopping on abnormal voltage.
Supports LiPo, Lilon, and LiFe battery types for charging and discharging.
Offers 'fast' charge to reduce duration and 'store' mode to protect battery for long-term storage.
Enables 1-5 cycles of charge/discharge or discharge/charge for battery refreshing.
Allows storage and recall of up to 5 different charge/discharge profiles for convenience.
Enables users to set the charge/discharge end voltage for precise control.
Allows checking of Li, NiMH, NiCd, and Pb battery voltages, including individual cells.
Critical safety notes regarding unattended charging, environment, input voltage, and surface placement.
Emphasizes checking battery specs, avoiding short circuits, and not charging incompatible battery types.
Table detailing voltages for LiPo, Lilon, LiFe, NiCd, NiMH, and Pb batteries.
Describes the main screen displayed upon powering on the charger, detailing its components.
Explains the function of each selectable button on the homepage for navigation and operation.
Guides users through basic navigation and selection process on the charger interface.
Details steps for connecting the power source and the battery to the charger.
Explains the correct procedure for connecting the battery's balance wire to the charger.
Covers setting battery type, cell count, capacity, and charge/discharge current.
Details various charging modes like CHARGE, DISCHARGE, STORAGE, FAST CHG, BAL CHARGE.
Explains how to start and stop a charging/discharging program.
Describes the screen display and audible notification upon program completion.
Shows charging capacity, cell voltage, time, and temperatures during operation.
Displays voltage in a graphic format to help monitor charging status.
Allows checking balance status and internal resistance for Lithium batteries in balance mode.
Checks total, highest, lowest, and individual cell voltages for Lithium batteries.
Allows checking the total voltage of Nickel and Pb batteries.
Details connecting motor/ESC, setting pulse width, and testing RPM.
Explains how to adjust pulse width to check motor RPM response.
Outlines connecting servo, setting pulse width, and checking servo response.
Describes adjusting pulse width and period to test servo operation.
Guides on editing and saving up to 5 charge/discharge profiles.
Explains how to recall stored profiles to quickly start a program.
Allows configuration of key beep, buzzer, LCD light, and theme.
Covers setting capacity cut-off, safety timer, and temperature cut-off for protection.
Allows setting terminal voltage control (TVC), end voltage, and rest time.
Lists common error messages and their explanations for troubleshooting.
Details input voltage, power, current ranges, cell counts, weight, and dimensions.
Lists the items contained within the product package.
Suggests compatible power supply units for the charger.
Lists optional temperature probes for monitoring battery temperature.
Details various adaptors and charging cables for different battery types.
Confirms adherence to relevant EC directives and FCC Part 15 Subpart B standards.
Outlines the one-year warranty against manufacturing defects and service conditions.
