Need help?Do you have a question about the Skyrc Ultimate 200W x2 and is the answer not in the manual?
General| Brand | Skyrc |
|---|---|
| Model | Ultimate 200W x2 |
| Category | Battery Charger |
| Language | English |
Discusses the AUTO function and its safety benefits.
Explains the built-in balancer for lithium batteries.
Details delta-peak sensitivity and auto termination.
Provides voltage and charge/discharge parameters for battery types.
Details charging procedures, connections, and manufacturer recommendations.
Explains discharge purpose, deep-discharge risks, and memory effect.
Illustrates correct connection of the balance wire to the charger.
Explains setting nominal voltage for LiFe, LiIo, LiPo batteries.
Describes automatic cell count detection and manual adjustment.
Details sensitivity settings for NiMH and NiCd termination.
Configures temperature probe cut-off during charging.
Sets an integral timer to prevent overcharging.
Sets maximum charge capacity to terminate process.
Explains CC/CV method for lithium batteries.
Details proper final voltage and current settings for lithium batteries.
Describes charging lithium batteries without a balance lead.
Guides on setting current and voltage for charging.
Explains checking detected vs. set cell counts for charging.
Explains balancing voltage of lithium-polymer cells.
Details connecting the balance lead for balance charging.
Lists common error messages and their causes.
To Next Page
