CDP-300 Installation Manual
Document Rev. 01.006 DOC0449 Page 12 of 31
Restricted Proprietary and Confidential Information
1.3.2 CDP-300
The CDP-300 has a small, easy to use form factor well suited to the demanding environment of working aircraft.
The CDP-300 consists of a DZUS rail mounted display (3 lines by 20 symbols) and a keypad (5 keys). The
keypad is used to navigate through the menu structure of the CDP-300.
The CDP-300 is currently available in 2 models: CDP-300G and CDP-300C. CDP-300G has a commercial grade
antiglare filter and a green backlit panel. CDP-300C has a NVIS-B green filter. The CDP-300 has a current sinking
output for a buzzer and dimmer voltage measuring circuits for standalone CDP mode.
The CDP-300 is designed to provide an easy to use interface to the ISAT-200. The interface enables the user to
make Sat phone calls by using a preprogrammed quick dial list from anywhere in the world.
Pre-programmed text messages are also supported, allowing users to get important information to the ground in
an efficient and timely manner without distraction from the mission.
The CDP-300 can also function in combination with the DVI-300. This enables the CDP-300 to display the
characters entered by the DVI-300 keypad.
1.3.3 CDP-300 INSTALLATION COMPONENTS
An installation kit (PN 106-300-01) is offered for installation of the CDP-300. The parts list of the Installation Kit
can be found in the CDP-300 Installation Kit Bill of Materials (DOC0464). The installation kit contains a mating
connector to the CDP-300 back shell and all necessary hardware to attach it.
The document reference is online, please check the correspondence between the online documentation and the printed version.
To Next Page
Loading...
Need help?
General