CDP-300 Installation Manual
Document Rev. 01.006 DOC0449 Page 19 of 31
Restricted Proprietary and Confidential Information
3.6.2 WIRING HARNESS
Determine the location of the CDP-300 in order to determine wiring harness lengths. Create the wiring harness for
your model of CDP-300 referencing applicable approved installation drawings for your airframe. Ensure the wiring
harness complies with the requirements of FAA advisory circular AC43.13-1B.
The document reference is online, please check the correspondence between the online documentation and the printed version.
To Next Page
Loading...