Skytrac CDP-300 Series - Physical Specifications; Safety Compliance; Environmental Test Summary; Table 4 - Cdp-300 Physical Specifications

CDP-300 Installation Manual
Document Rev. 01.006 DOC0449 Page 15 of 31
Restricted Proprietary and Confidential Information
2.4 PHYSICAL SPECIFICATIONS
Table 4 – CDP-300 Physical Specifications
Operating Temperature
-15ºC to +55ºC
Short Term Operating Temperature (30
minutes)
-40ºC to +70ºC
Operating Altitude
Max. Operating= 55,000 ft (16,760 m)
Size
L: 5.7” (145.8 mm)
H: 1.8” (46.7 mm)
W: 3.1” (78.5 mm) excluding connectors
Weight
0.33kg (0.73 lbs)
Mounting
DZUS rails using 4 1/4 Turn Studs.
2.5 SAFETY COMPLIANCE
CDP-300C and CDP-300G are qualified to the DO-160E environmental category:
[(A1) (F1)]- CXB [(SBM) (UG)] XXXXXXZBBXXXMXXXXX
The tests demonstrated that the CDP-300 does not exhibit any unsafe performance when exposed to the
specified environmental test conditions, and that installation of the CDP-300 in accordance with the installation
instructions in this Manual will not pose a hazard to the continued safe flight and landing of the aircraft.
2.5.1 ENVIRONMENTAL TEST SUMMARY
The following table summarizes DO-160E Environmental Testing for the CDP-300.
The document reference is online, please check the correspondence between the online documentation and the printed version.