19
EN
• Turn the Encoder knob until Full Clean DSSHDUV
on the Barista Dashboard:
Full Clean
• Push the Encoder knob to start the cleaning cycle.
The Barista Dashboard shows the following message,
where XXs indicates the time left until the end of this
SKDVH
Full Clean
XXs
• When the countdown reaches the end, the Barista
Dashboard shows: º
for Flush:
Remove Portafilter
Click for Flush
• 'LVHQJDJHWKHSRUWD¿OWHUIURPWKHJURXS
• 3XVKWKH(QFRGHUNQREWRVWDUWWKH¿QDOZDVKSKDVH
Remove Portafilter
Click for Flush
• The Barista Dashboard shows the following message:
Full Clean Final Flush XXs, where XXs
indicates the time remaining until the end of the clean
ing cycle:
Full Clean
Final Flush XXs
• At the end of the countdown, the Barista Dashboard
returns to the main screen and the wash cycle ends:
Time Temp Stm M
22.5s 89.2°C 1.2b
WARNING: Once the Full Clean cleaning cy-
cle has started, it cannot be stopped, even if the
machine is switched off. In the event of a sud-
den power failure, the following message will
appear on the Barista Dashboard when power is
restored:
OFF 12:34a
Mon
Turn the Encoder knob to resume activity: