Need help?Do you have a question about the Slayer STEAM EP and is the answer not in the manual?
General| Type | Espresso Machine |
|---|---|
| Boiler Type | Dual Boiler |
| Boiler Material | Stainless Steel |
| Power | 1600W |
| Pump Type | Rotary |
| Pre-infusion | Yes |
| Material | Stainless Steel |
| Voltage | 110V/220V |
Preparing the installation location for the espresso machine.
Procedure for safely unpacking the Slayer Steam EP machine.
Connecting the water supply and drain lines to the machine.
Connecting the espresso machine to a suitable power source.
Process for filling the machine's water and steam tanks.
Activating the machine's heating elements for initial startup.
Understanding the interface, menus, and basic operations.
Performing automated cleaning cycles for group heads.
Accessing manager settings and available menu options.
Procedure to adjust the espresso machine's brew pump pressure.
Procedure to adjust the hot water temperature output.
Calibrating brew temperature by adjusting offsets.
Calibrating flow meters for consistent volumetric output.
Summary of cleaning and maintenance tasks outlined in the manual.
Instructions for cleaning the machine's exterior and steam wands.
Routine care and cleaning of the espresso machine's group heads.
Diagrams showing electrical connections for machine components.
Detailed electrical connections for 2-group machines.
Detailed electrical connections for 3-group machines.
To Next Page
