Slayer STEAM EP - Fast Clean Procedure

SLAYER STEAM EP USER MANUAL V1.1 | SEPTEMBER 11, 2018 45
FAST CLEAN
Designed to be done without the use of detergent after the busy portion
of the day, at the shift change or when changing out the coees in the
hopper. Leave the screen, screw in place. Complete the following steps for
each group head whenever your machine requires minor cleaning.
INCLUDED PARTS
• Blind portafilter insert
REQUIRED TOOLS
• Group brush or non-fiber towel
• A blunt end object
RECOMMENDED SUPPLIES
• Soft, clean towel
PROCEDURE
1. Remove portafilter from group head, then use a cleaning brush to
scrub the portafilter gasket, loosening oil and coee grounds.
2. Replace portafilter basket with a blind insert and lock it in the
group head.
3. Press and release the jog wheel above the group head to activate
the menu.
4. Rotate the jog wheel counterclockwise to the “Fast Clean” setting.
5. Press and release the jog wheel to enter the “Fast Clean” setting. The
option to select a cleaning program will be presented.
6. Press and release the jog wheel to select and initiate Fast Clean.
7. Follow the prompt on the screen to remove the portafilter from the
group head, then press and release the jog wheel to continue.
8. Remove the blind insert from the portafilter and use a damp towel to
wipe oil and grounds from portafilter body.
9. Rinse the portafilter with hot water, then insert the portafilter basket
and lock it in the group head.
10. Repeat all steps for each group head, as needed. This feature is
available per group and intuitively placed last on the menu for counter
clockwise turn to, quick activation.