SMA 9000TL - Page 29

Installation Manual SMC9-11TLRP-IA-en-51 29
SMA Solar Technology AG 5 Mounting
5. If the inverter is to be secured against theft, mark the drill hole for the attachment of the safety
screw:
• Drill the hole or holes to attach the safety screw and insert the wall plug(s).
• Hook the inverter into the wall mounting
bracket.
• Mark the drill hole on the left-hand side or
right-hand side. If you want to secure the
inverter with two safety screws, mark both drill
holes.
• Remove the inverter by lifting it up vertically
and out of the wall mounting bracket.
6. Hook the inverter into the wall mounting bracket.