18_06_07_Battery Backup Distribution_10010371_ENG_V1.8 Seite -11- von -38-
4. Electrical Connection
4.1 Installation Energy Meter / Home Manager
Instead of the Energy Meter / Home Manager, screw terminals are used as placeholders.
An Energy Meter / Home Manager is not included in the scope of delivery and must be
retrofitted!
The terminals are capable of carrying currents, whereby the basic function oft he automatic
transfer switch is given. Thus, the automatic transfer switch can already be connected and tested
without Energy Meter / Home Manager.
During installation, note the positioning of the Energy Meter / Home Manager to the cover strips
of the distribution board.
When installing the Energy Meter / Home Manager, observe the maximum permissible torque of
2.0 Nm!
for
E-Meter /
Home
Manager
To Next Page
Loading...