SMA Enwitec Sunny Island 4.4M - Symbols Used on the Type Label

18_06_07_Battery Backup Distribution_10010371_ENG_V1.8 Seite -8- von -38-
2.3 Symbols used on the type label
Symbol Definition
It is not
allowed to dispose the Battery Backup Distribution in the
household garbage!
CE
-
Declaration
Declaration, that the Battery Backup Distribution meets all the mandatory
european standards.
Protection class II
The protection of the Battery Backup Distribution against electric shock is secured
due to a reinforced insulation.
no symbol
Protection rating IP65 (Ingress Protection Rating)
The Battery Backup Distribution is either protected against dust tight and water
jets (IP65)or protected against solid foreign objects of ≥1 mm diameter and water
splashing on all sides (IP44)
no symbol
m
ax.
ambient t
emperatur
e
(t
a
) [°C]
Up to this ambient temperature you may use the Battery Backup Distribution.
no symbol
Rated voltage
[V]
Do not use the Battery Backup Distribution in other than this voltage range!
no symbol
Rated frequency
[Hz]
Do not use the Battery Backup Distribution in other than this frequency range!
no symbol
Rated power
[kW]
Do not connect more input- or distribution power!
no symbol
Peak
–
Input current
[A]
You may use the Battery Backup Distribution up to this peak-input current!
no symbol
IEC/EN
–
Standard
The Battery Backup Distribution fulfils:
IEC/EN61439-1 "Low-voltage switchgear and controlgear assemblies"
IEC/EN61439-2 "Power switchgear and controlgear assemblies"
IEC/EN61439-3 "Distribution boards intended to be operated by ordinary
persons (DBO)