EasyManua.ls Logo

SMA SUNNY BOY 3.0 - Protective Devices

SMA SUNNY BOY 3.0
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13 Technical Data
SMA Solar Technology AG
Operating manual SBxx-1AV-41-BE-en-12 105
Additional data volume when using the
SunnyPortal live interface
660 kB/hour
Topology Transformerless
Cooling method Convection
Degree of protection for electronics in accor-
dance with IEC60529
IP65
Protection class in accordance with
IEC62109-1
I
Grid configurations* IT, Delta-IT, TN-C, TN-S, TN-C-S, TT (when V
N_PE
<20V)
* IT, Delta-IT: When using in these systems, the grounding conductor monitoring must be deactivated
and an additional grounding connected to the inverter.
13.3 Climatic Conditions
Installation in accordance with IEC60721-3-3, Class4K4H
Extended temperature range -25°C to +60°C
Extended humidity range 0% to 100%
Extended air pressure range 79.5kPato106kPa
Transport in accordance withIEC60721-3-2, Class2K3
Temperature range -25°C to +70°C
13.4 Protective Devices
DC reverse polarity protection Short-circuit diode
Input-side disconnection point DC Load-Break Switch
AC short-circuit current capability Current control
Grid monitoring SMA Grid Guard 10.0
Maximum overcurrent protection 32 A
Ground fault monitoring Insulation monitoring: R
iso
>200kΩ
All-pole sensitive residual-current monitoring unit Available
13.5 Equipment
DC connection SUNCLIX DC connector
AC connection AC connector
WLAN As standard

Table of Contents

Other manuals for SMA SUNNY BOY 3.0

Related product manuals