11 Troubleshooting
SMA Solar Technology AG
Operating manualSBxx-1AV-41-BE-en-1296
12. Recommission the inverter.
13. If the inverter still displays an insulation error, contact the Service (see Section14, page107).
The PV modules might not be suitable for the inverter in the present quantity.
11.4 Problems with streaming services
If you use the streaming service in your local network (in which the inverter is also included), there
may be interference to the transfer of data. In this case, the IGMP settings of the inverter can be
changed via operating parameters.
• Contact the Service and change IGMP settings in consultation with the Service department.
To Next Page
Loading...
