4 Product Overview
SMA Solar Technology AG
Operating manual SBxx-1AV-41-BE-en-12 15
4 Product Overview
4.1 Product Description
Figure 2: Design of the product
Position Designation
A DC load-break switch
B LEDs
The LEDs indicate the operating state of the product.
C Label with QR Code for scanning via the SMA 360° App and easy connec-
tion to the inverter's user interface via WLAN
D Type label
The type label clearly identifies the product. The type label must remain per-
manently attached to the product. You will find the following information on
the type label:
• Device type (Model)
• Serial number (Serial No. or S/N)
• Date of manufacture
• Identification key (PIC) for registration in Sunny Portal
• Registration ID (RID) for registration in Sunny Portal
• WLAN password (WPA2-PSK) for the direct connection to the user
interface of the inverter via WLAN
• Device-specific characteristics
To Next Page
Loading...
