5 Mounting
SMA Solar Technology AG
Operating manualSBxx-1AV-41-BE-en-1226
Dimensions for mounting:
UP
90
120
150
30
172
298
470
121
9 x 18
Ø 9
9 x 18
315
435
9 x 18
107.5
126.5
93
156.5 156.5
217.5 217.5
Figure 6: Position of the anchoring points(Dimensions in mm)
Recommended clearances:
If you maintain the recommended clearances, adequate heat dissipation will be ensured. Thus, you
will prevent power reduction due to excessive temperature.
☐ Maintain the recommended clearances to walls as well as to other inverters or objects.
☐ If multiple inverters are mounted in areas with high ambient temperatures, increase the
clearances between the inverters and ensure sufficient fresh-air supply.
To Next Page
Loading...
