8 Operation
SMA Solar Technology AG
Operating manual SBxx-1AV-41-BE-en-12 51
SSID, IP address and WLAN password
• SSID in WLAN: SMA[serial number] (e.g. SMA0123456789)
• Device-specific WLAN password: see WPA2-PSK on the type label of the product or the
rear side of the manual included in delivery
• Standard access address for a direct connection via WLAN outside of a local network:
http://smalogin.net or 192.168.12.3
Importing and exporting files with end devices having an iOS operating
system is not possible.
For technical reasons, importing and exporting files (e.g., importing an inverter configuration,
saving the current inverter configuration or exporting events and parameters) is not possible
with mobile end devices having an iOS operating system.
• Use an end device that does not have an iOS operating system for importing and
exporting files.
You have several options to connect the product to an end device. The procedure can be different
depending on the end devices. If the procedures described do not apply to your end device,
establish the direct connection via WLAN as described in the manual of your end device.
The following connection options ar available:
• Connection to SMA 360° App
• Connection with WPS
• Connection with WLAN network search
Connection to SMA 360° App
Requirements:
☐ An end device with camera must be available.
☐ The SMA 360° App must be installed on the end device.
☐ An user account for SunnyPortal must already exist.
Procedure:
1. Open the SMA 360° App and login with dem SunnyPortal account details.
2. Select Service > QR-Code Scan.
3. Scan the QR Code on you product via the SMA 360° App.
☑ The end device automatically connects to the inverter. The web browser of your end
device opens and the login page of the user interface is displayed.
4. If the web browser of your end device does not open automatically and the login page of the
user interface is not displayed, open the web browser and enter https://smalogin.net in the
address bar.
Connection with WPS
Requirement:
☐ The end device must have a WPS function.
To Next Page
Loading...
