To Next Page
M
matthew33Sep 1, 2025
How to fix external fan fault (Event 7508) on SMA SUNNY BOY 4000TL?
- EEmily BlackSep 1, 2025
If your SMA Inverter shows an external fan fault (Event 7508), the fan is either clogged or defective. Clean the fan or replace it.
How to fix external fan fault (Event 7508) on SMA SUNNY BOY 4000TL?
If your SMA Inverter shows an external fan fault (Event 7508), the fan is either clogged or defective. Clean the fan or replace it.
What to do if my SMA SUNNY BOY 4000TL says SD card defective (Event 7101)?
If your SMA Inverter says the SD card is defective (Event 7101), the SD card is not formatted correctly or is defective. Re-format the SD card and re-save the files to the SD card.
How to fix parameter file not found error (Event 7102) on SMA Inverter?
If your SMA Inverter reports that the parameter file was not found or is defective (Event 7102), copy the parameter file into the SD card drive :\PARASET directory.
What to do if my SMA Inverter says update file defect (Event 7106)?
If your SMA Inverter indicates that the update file is defective (Event 7106), re-format the SD card and re-save the files to the SD card.
General| Rated Output Power | 4000 W |
|---|---|
| Max. Input Voltage | 600 V |
| Number of MPP Trackers | 1 |
| European Weighted Efficiency | 96.5% |
| Nominal AC Voltage | 230 V |
| Frequency Range | 50 Hz / 60 Hz |
| Protection Class | IP65 |
| Operating Temperature Range | -25 °C to +60 °C |
| Model | SUNNY BOY 4000TL |
| Cooling | Natural convection |
Explains icons, warnings, and defines terms used in the manual.
Describes the product's purpose and suitability.
Details the necessary qualifications for performing tasks.
Outlines essential safety rules and warnings.
Introduces the inverter and its basic design.
Details connectivity options and features.
Covers installation location prerequisites.
Provides step-by-step installation instructions.
Details critical safety measures.
Explains requirements and procedures for AC connection.
Covers requirements and procedures for DC connection.
Outlines the steps for initial start-up.
Guides on setting the correct country data.
Details the process of putting the inverter into operation.
Describes the general process for adjusting settings.
Explains how to modify inverter settings.
Describes the inverter's display layout and information.
Provides detailed electrical parameters.
Covers weight, dimensions, and environmental conditions.
