Electrical Connection SMA Technologie AG
36 SB40TL_50TL-IEN081211 Installation Guide
7. Check the Electronic Solar Switch for wear as
described in section 9.2 and connect it after
successful testing.
You can now commission the Sunny Boy as described in section 7 „Commissioning” (Page 47). The
following connections and settings are optional.
NOTICE!
Damage to the Electronic Solar Switch!
If inserted incorrectly the Electronic Solar Switch could be damaged.
• Press the handle firmly into place on the socket of the Electronic Solar Switch!
The handle must be flush with the housing.
• Ensure that it is securely in place!
To Next Page
Loading...
