SMA Solar Technology AG 7 Commissioning
Installation Manual - Quick Reference Guide FSS-IS-en-42 23
Set the battery type.
LiIon_Ext-BMS: lithium-ion battery VRLA: lead-acid battery with electrolyte absorbed in glass
mat or immobilized in gel
FLA: lead-acid battery with liquid electrolyte
Set the battery capacity for ten-hour electric discharge
(for determining the battery capacity, see the Sunny Island
inverter installation manual).
Set the nominal voltage of the battery.
Set the battery capacity for ten-hour electric discharge
(for determining the battery capacity, see the Sunny Island
inverter installation manual).
Also, during the first ten operating hours,
set the country data set:
VDE-AR-4105: thresholds of the AC connections correspond to the application directive VDE-AR-N 4105
AS4777: limiting values correspond to the standard AS4777.
Ensure that the function SelfConsOnly is set.
Set the number of Sunny Island inverters in the system:
1Phase: System with 1 Sunny Island 3Phase: system with three
Sunny Island inverters
To Next Page
Loading...
