Need help?Do you have a question about the SMA SUNNY TRIPOWER 60 and is the answer not in the manual?
General| Cooling | Forced Air Cooling |
|---|---|
| Protection Degree | IP65 |
| Maximum DC Input Voltage | 1000 V |
| AC Output Frequency | 50 Hz / 60 Hz |
| Rated Output Power | 60 kW |
| Weight | 77 kg |
| DC Input Voltage Range | 200 V – 1000 V |
| AC Output Voltage | 3 x 400 V |
| Operating Temperature Range | -25°C to +60°C |
| Number of MPP Trackers | 3 |
| Number of MPPTs | 3 |
Describes the tasks the Modbus interface is designed for, including remote control and querying of PV systems.
Details the necessary skills for personnel performing tasks described in this document, focusing on network and Modbus knowledge.
Provides guidance on protecting PV system data in Ethernet networks, including firewall and VPN recommendations.
Lists the specific SMA devices supported by the SunSpec Modbus interface, including inverters and managers.
Explains the Modbus Application Protocol as an industrial communication standard used in the solar sector for data exchange.
Details the SunSpec Modbus profile, SMA's mapping of STP60 data points, and adherence to the SunSpec specification.
Describes the PV system topology, including the role of the Inverter Manager as a Modbus slave and gateway for STP60 devices.
Covers Modbus Unit IDs, register assignment, register width, data blocks, and data transmission methods.
Explains the structure and information provided in the SunSpec Modbus register assignment tables, including register numbers and data types.
Details the SunSpec Modbus registers provided by the Inverter Manager gateway, accessible via Unit ID 125.
Summarizes SunSpec Modbus registers for SUNNY TRIPOWER 60 inverters (Unit IDs 126-168).
Describes registers for the Direct Marketer Interface (Unit ID 200) used for system output management.
Specifies the default communication port for the Modbus TCP protocol, noting it cannot be changed.
Details typical data processing and reaction times for the Modbus interface, including minimum read-write frequency.
To Next Page
